Armazenamento de cantilever rolante

The Economics of Air: Forklift vs. Crane

Every square meter of your facility has a dollar value attached to it. It costs money to heat, light, and insure. Yet, in a traditional static rack layout, you are forced to dedicate massive amounts of this expensive real estate to “nothing.”

To maneuver a 6-meter bundle of structural steel, a standard forklift requires an aisle width of approximately 5 to 6 meters. This means that for every row of product you store, you are paying for an even wider row of empty space just for navigation. This is a layout designed around the limitations of the vehicle, not the efficiency of your business.

Mudando para um Estante telescópica cantilever, you change the rules of geometry. Because the racks are accessed from above by an overhead crane, the aisle only needs to be as wide as a human operator or the load itself—often less than 1.5 meters. This simple switch can instantly compress your storage footprint by 50%, effectively doubling your capacity without laying a single new brick.

Stop “Digging” for Profits: The End of Secondary Handling

Space is money, but time is profit. The second major killer of efficiency in handling long goods (like pipes, tubes, and bars) is a phenomenon known as “The Hidden Factory.”

Consider a standard floor-stacking scenario or a deep static rack. You need the bundle of 304L stainless steel bars that arrived last week. Unfortunately, it is buried under three bundles of carbon steel that arrived yesterday. To get to the product you need, your operator must:

• Move Bundle A to a temporary spot.
• Move Bundle B to a temporary spot.
• Move Bundle C to a temporary spot.
• Pick the target bundle.
• Return Bundles A, B, and C to the stack.

This is “secondary handling.” It adds zero value to the product but consumes 15 to 25 minutes of labor and machine uptime. With a Estante telescópica cantilever, every single drawer is 100% accessible at all times. You crank out the specific level you need, lift it, and move on. The retrieval time drops to under 3 minutes.

Point-of-Use Storage: Feeding the Machine

The ultimate goal of modern lean manufacturing is to minimize the distance materials travel. Traditional racks are often relegated to a distant “storage corner” because they take up so much room.

Because of its compact footprint, a Telescopic Rack can be installed directly next to your key revenue centers—your laser cutters, saws, and CNC machines. The rack becomes a “point-of-use” magazine. Your machine operators can load raw materials directly from the rack to the machine bed using a vacuum lifter or jib crane. This eliminates the wait time for a forklift driver to arrive from across the factory, keeping your expensive machinery running at peak utilization.

Métrica	Floor Stacking / Static Rack	Estante telescópica cantilever
Aisle Requirement	5-6 Meters (Wide)	~1.5 Meters (Narrow)
Tempo de recuperação	15-25 Mins (Digging required)	2-3 Mins (Instant access)
Utilização do espaço	Poor (High “Air Tax”)	Excellent (High Density)
Workflow	Remote Storage	Machine-Side Integrated

Projetado para os Pesos-Pesados

Do not mistake compact design for weakness. These systems are engineered with structural steel H-beams and industrial-grade bearings specifically for heavy industry. Whether you are storing 6-meter bundles of steel pipe, solid bar stock, or heavy injection molds, the system is built to handle loads from 1,000 kg up to 5,000 kg per drawer.

This is not just shelving; it is heavy equipment designed to hold heavy equipment. It allows you to vertically stack your heaviest inventory safely, reclaiming your floor for what matters most: production.

---

Perguntas frequentes

1