Many customers are not clear about the difference between ordinary cantilever racking and Telescopic Cantilever Rack, their warehouse in the end which is suitable for, the following will take you to understand the difference between the two again.

 

1. Racking structure is different. Ordinary cantilever racking is a combination of basic beams and columns, Telescopic Cantilever Rack structure is more advanced, the main frame is welded together to form an assembly unit, the mobile part is supported by the bearings, the use of rack and pinion and crank.

 

2. The direction of cantilever expansion and contraction is different. Ordinary cantilever racking cantilever can only be adjusted up and down the distance between each layer, the left and right structure is fixed, can not be moved to adjust the Telescopic Cantilever Rack cantilever not only up and down can be adjusted, but also can be 100% before and after the telescopic adjustments, and can be adjusted to stretch out the main body of the shelves.

 

3. The order of accessing goods is different. Ordinary cantilever rack can only take the upper layer after taking the lower layer, the inventory can only be put on the lower layer after putting the upper layer, very inconvenient. rolling cantilever rack access to any, not subject to the order and height of the number of layers of restrictions.

 

4. Different types of goods can be stored. Ordinary cantilever rack can only store some common goods, and rolling cantilever rack storage more kinds of goods, storage of goods is not limited by the specification of the shape of the length of most types of goods can be stored, especially suitable for the storage of some bad storage of tubes, profiles, rods, square tubes, cylinder barrels, aerospace fittings, military fittings, long goods, bulky goods, irregularly shaped goods, storage length of up to 70 meters. The storage length of the goods reaches 70 meters.

 

5. Different supporting equipment required. Ordinary cantilever rack due to its structural limitations mainly combined with the use of forklifts, customers have to buy professional supporting forklifts, while rolling cantilever rack is used with overhead cranes, cranes supporting the use of mechanized access to the general plant have overhead cranes to make, no need to buy other equipment, cost savings.

 

6. Different storage capacity and space utilization rate. Ordinary cantilever racking combined with forklift use, need to reserve a larger forklift channel, forklift channel covers a large area, the storage capacity is reduced accordingly. And tube material rack with the use of overhead crane, without too large a channel, the overall footprint of the rack is small, tightly arranged, large storage capacity, suitable for small warehouses, and racking cantilever itself can be adjusted telescopic, more space-saving, the overall storage capacity is 2-3 times the ordinary cantilever racking.