Telescopic Rack for Long Bars, Tubes, and Raw Material Staging in Machining Workshops
Designed for machining shops that need compact long-stock storage, cleaner retrieval, and better control over raw material flow before cutting and processing.
Terack is a strong fit for machine shops handling long bars, tubes, shafts, profiles, and other raw stock that feeds saws, lathes, machining centers, and downstream fabrication work. In these environments, the storage issue is not just load capacity. It is also about keeping long material organized, reducing wasted movement, and retrieving one exact layer without turning the aisle into a bottleneck.
- Designed for 6000 mm long stock.
- Double-side telescopic arms for more direct access to stored material.
- Suitable for machining, cutting preparation, and raw material staging zones.
Why machine shops need better long-stock storage logic
Machining workshops often lose time before the spindle even starts. Operators spend extra minutes locating the right bar, separating one size from another, and pulling long raw stock out of awkward floor stacks or deep fixed racks. That waste is easy to ignore, but it quietly slows every cutting, turning, and prep operation that depends on steady material flow.
A telescopic cantilever system improves that situation by bringing the stored layer outward, which makes long stock easier to identify, reach, and move toward the next machine-side process.
Technical Specifications
| Parameter | Value |
|---|---|
| Material length | 6000 mm |
| Single-side load limit per level | Up to 2 tons |
| Telescopic arm extension | 650 mm |
| Storage height per level | 300 mm |
| Levels | 4 telescopic levels + 1 fixed top level |
| Configuration | Double-side telescopic arms |
| Rack total length | 6300 mm |
| Rack total width | 1710 mm |
| Rack total height | 2640 mm |
Faster raw-stock retrieval
The outward-moving arm helps operators reach one specific layer of long material more directly before cutting, sawing, or machining.
Better machine-side organization
Long stock can be separated by diameter, alloy, job, or cutting sequence instead of being mixed in floor piles near the work area.
Stable installed structure
Cross bracing between columns builds a more stable triangular frame, and base plates include anchor holes for fixed installation.
Key Product Details
- Gear-and-rack transmission helps maintain controlled telescopic arm travel without slip.
- Where upper levels are too high for easy crank use, chain transmission can lower the operating handle to a better working height.
- The rack can ship in partly assembled form, leaving the remaining loose parts for final site installation.
- The layout works well for bars, tubes, profiles, and long raw stock that must stay organized before machining and cutting operations.
This makes the system useful for machine shops, cutting preparation areas, fabrication support zones, and other operations where long material feeds multiple processes.
Frequently Asked Questions
Can this rack be used for bars, tubes, and other long raw machining stock?
Yes. It is designed for long material that needs organized storage and cleaner access before machining or cutting.
Why choose telescopic arms for a machining shop?
Because they improve access to one exact layer of raw stock and help reduce wasted time during retrieval.
Is it suitable for compact machine-side layouts?
Yes. The rack helps organize long stock while protecting more usable working area around the process zone.
Can it be installed after partly assembled shipment?
Yes. The structure supports partly assembled delivery and final completion of the remaining loose parts on site.
EN 
DE 
RU 
NL 
PT 
JA 
ES 
IT