Metal sheet rack vertical is more suitable for organizing and managing your sheet metal, keeping workers safe and protecting the sheets. It is suitable for small sheets, loose sheets, large sheets of scrap, offcuts, semi-finished sheets, sheets with special storage requirements, etc…

Usually METAL SHEET RACK VERTICAL is mechanically operated system.

Features:
1. easy viewing and selection of sheets as it can be stored by size, thickness, type, etc.
2. Push-out sliding units can be pulled out 100%.
3. Load capacity of each roll-out unit is up to 2 tons. 4.
4. can be easily operated by a single person, thus saving time and labor.
5. There will be a small inclination of 3 degrees to prevent the sheet from slipping, so valuable metal materials can be protected.
6. It saves space and makes the workshop cleaner and tidier while ensuring the safety of workers.
7. Vertical racks can be designed to move in both “forward and backward” and “left and right” ways.

This is our technical drawing.
Quality requirements
1. Rectangular tube pipe thickness tolerance equal to ± 10% of its wall thickness, the main material: frame 60 * 40 rectangular tube, drawer 40 * 40 rectangular tube;
2. The height of the weld is not less than the thickness of the base material, the frame and the drawer parts and components connected to the weld are strength full welding, do not allow spot welding, leakage welding, pipe
The head needs to be sealed with plastic plug cover, the incision shall not be exposed, if there is any welded seam on the side of the pipe opening that needs to be sealed, it needs to be polished and smoothed;
3. The tolerance of unnoticed dimensions is required by GB1804-2000 in C level. 4;
4. the product surface treatment form for electrostatic spraying, the color is blue RLA5010, spraying layer requires comprehensive, uniform and good adhesion;
5. under uniform load, the single drawer can carry 200kg, and the total load can be 1000kg;