Stop Wasting 20 Minutes on "Floor Stacking" Shifting.

Deploy the ultimate Crank-Outシステム designed for heavy sheet metal and glass. Reclaim 70% of your factory floor and enable 100% selective crane access in under 2 minutes.

Get A Custom Storage Plan

The Engineering Behind Massive ROI

STRUCTURE → SPACE VALUE

Compress Aisles. Expand Capacity.

Traditional static racks or floor stacking require permanent, massive aisles for overhead crane or forklift access. Our Mobile-Aisle Architecture condenses all storage units into a single footprint.

結果 You instantly recover at least 70% of your factory floor. Stop paying rent for dead aisle space and use that footprint for profit-generating laser cutters or bending machines.

Dotted lines showing the space saved by the crank-out system's mobile aisle design compared to static industrial sheet metal racks
FUNCTION → EFFICIENCY VALUE

100% Direct Access to Any 3-Ton Plate

Digging out a bottom steel plate from a floor stack is a dangerous, 20-minute bottleneck. The Cplarack system utilizes a precision Gear & Rack Drive, allowing a single operator to manually crank open a 3-ton drawer effortlessly.

結果 Material retrieval time drops to under 2 minutes. Your downstream machinery (CNC, lasers) never waits for raw materials again.

Close up of a factory worker standing on a green safety platform, precisely operating an overhead crane to retrieve metal plates
DETAILS → SAFETY VALUE

Engineered to Prevent Industrial Disasters

Heavy loads demand uncompromising safety. Our system features a mechanical Anti-Tilt Limit Wheel integrated under the track, and structural frames engineered with an upward tilt angle.

結果 Zero risk of rack tipping. Zero material slipping. You eliminate the devastating safety hazards and material damages associated with collapsed floor stacks.

Close-up red arrows pointing to the heavy-duty anti-tilt track foundation of the crank-out sheet metal rack system

Visual Evidence: Built for Harsh Environments

Worker on a ladder preparing to rig a large red metal plate safely within the open aisle of the vertical storage system

Crane Integration Ready

Designed specifically for overhead crane compatibility. Clear vertical lift paths mean no more struggling with horizontal drawer extraction.

Close up of the golden safety locking hook on the heavy duty blue crank out metal frame

Fail-Safe Locking Mechanism

Every dynamic frame is equipped with heavy-duty safety locks, ensuring drawers remain immobilized during loading and unloading procedures.

Industrial grade steel rollers on the track of the crank-out sheet storage system ensuring smooth manual operation

Low-Friction Steel Rollers

High-grade load-bearing rollers allow operators to smoothly move thousands of kilograms with a simple hand crank, saving extreme physical labor.

Factory worker effortlessly pulling out a heavy yellow vertical storage rack loaded with large fragile glass panels

Fragile Material Protection

For glass and high-end aluminum, contact surfaces are equipped with 12mm thick, flush-mounted rubber pads to absorb shock and eliminate edge chipping.

Why Settle for Outdated Storage?

Storage Metric Standard Floor Stacking Static Cantilever Racks Our Crank-Out System
ボトムシートへのアクセス ~20 Mins (Requires complete reshuffling) Direct, but needs massive forklift aisles Under 2 Mins (100% Selective)
Floor Space Efficiency Very Poor (Wasted 2D spread) Moderate (50% lost to aisles) Maximum (+70% Space Reclaimed)
Load Capacity Per Unit Limited by collapse risk Usually 1-2 Tons per arm Up to 3,000 kg (3 Tons) per Drawer
Material Damage Risk High (Scratching, rust, edge damage) Medium Zero (Rubber pads & vertical isolation)

Industrial Grade 仕様

Max Drawer Load Capacity

3,000 KG

Drive Mechanism

Gear & Rack (No Slip)

Construction Material

Q235構造鉄鋼

System Dimensions

100% Customizable

Frequently Asked Questions

Will a 3-ton point load damage our concrete floor?

No. Our track system utilizes specifically engineered ground plates that distribute the heavy dynamic loads evenly across your concrete slab, securing via chemical anchors to prevent floor cracking.

Does installation require us to halt factory production?

Our systems are shipped as optimized modular components. The installation focuses on aligning the floor tracks and bolting the frames. We design the installation process to happen alongside your operations with minimal to zero production downtime.

Is it difficult for an operator to manually crank a fully loaded 3-ton drawer?

Not at all. The hand crank is connected to a high-ratio sprocket and chain transmission system. This mechanical advantage allows a single operator to move tons of steel with the physical effort of turning a steering wheel.

Can we store oversized, non-standard metal plates or extra-thick glass?

Absolutely. The length, height, and drawer width (typically 160mm to 350mm) are highly customizable. We have successfully deployed systems for 6-meter wind tower steel plates and 3.6m architectural glass panels.

How do you prevent high-value stainless steel or glass from scratching?

Every contact point on the structural frame is lined with heavy-duty 12mm rubber padding. We use countersunk flat-head screws to secure the padding, guaranteeing no metal-on-metal or metal-on-glass contact.

Stop Shifting. Start Manufacturing.

Speak with an Industry Storage Expert

私たちの製品についてもっと知りたいですか？

“Don’t hesitate to contact us now! Our professional team is ready to answer any questions you may have—and we’re ready to provide a free, tailored solution just for you.”