Mold rack is an efficient and secure solution for storing molds in limited spaces.

Half-open type: below 1 ton; full-open type: within 5 tons (can be customized).

Yes, the drawers are equipped with rolling bearings in the lower part of the drawer to ensure smooth pull-out and reset. Meanwhile, the drawers are equipped with positioning pins and limit pins to lock the position, which is very safe.

Yes, the height can be adjusted and the length can be extended by increasing the number of spans.

Yes, the top of mold rack can be equipped with manual or electric hoist, which is convenient for lifting the molds and saves labor.

Half-open type for load capacity below 1 ton; full-open type for large load capacity or frequent operation.

Large size, heavy duty molds (within 5 tons) and frequent changeover scenarios.

Yes, you can. We provide professional free design and fast service.

No. Mold racks usually have a high load capacity, so they can also be used to store other heavy tools or equipment, such as large fixtures, testing instruments, etc.

Mould rack can work with traveling crane, electric hoist, forklift, mold truck.

The size of the drawer can be customized according to customer’s requirements.

Conventional Mould rack can store 4 layers.

Yes, it is possible.

Pull out the drawer → use traveling crane/hoist to place the mold → reset the drawer.

According to the size of the molds, site conditions, specific analysis.

You can consider the average size of your molds, weight, quantity, available space in the workshop, access frequency and budget. Our engineers are also very happy to provide you with professional advice on selection, please feel free to contact us.

Mould rack material selection needs to consider the load-bearing capacity, the use of the environment and the size of the mold and other factors, at present the mainstream material of the mold rack is cold-rolled steel plate and hot-rolled steel plate. Cold rolled steel plate is suitable for light duty mould rack (<1 ton), and hot rolled steel plate is suitable for heavy duty mould rack (>1 ton).

We will provide detailed installation instructions, most of the products can be installed by customers. If you need, we can also provide professional door-to-door installation instruction or installation service, please consult with us.

Yes, you can tell us your specific needs, our engineers will design and produce according to your requirements.

Protect it from moisture and sunlight, and remove dust regularly;
Regularly check whether the structural parts are deformed and cracked;
Regularly check whether the cross-pull safety pin, screws are lost or loose;
Regularly check whether the ground is sinking and the wall paint is tilting;
Discover hidden dangers and deal with them in time or contact the after-sales service;
If there is an emergency situation, such as the column bending, beam bending, beam laminate falling, according to the degree of crisis on the scene, the situation is serious, the first emergency evacuation to evacuate the surrounding personnel, in the case of confirming that the collapse will not occur, move the damaged shelves empty goods, set up a safety warning.