Maximizing Efficiency with Double Sided Roll Out Cantilever Racks

In de magazijninrichting is de vloeroppervlakte van onschatbare waarde en de centrale toegang biedt een unieke kans. Het plaatsen van het rek tegen de muur is standaard, maar het gebruik van het centrum van de faciliteit vereist een andere aanpak. De Dubbelzijdig uit de jib gerold is the “island” solution for high-density storage. By allowing drawers to extend in both directions (front and back), a single racking unit can serve two parallel aisles. This effectively doubles the storage capacity per square foot of footprint, allowing facilities to consolidate their heavy bar stock and pipe inventory into a centralized, highly accessible zone. Praten met experts

Centralizing Inventory with Dual Access

The “Christmas Tree” rack is a familiar sight in many shops, but it is static and inefficient. A double-sided roll out system changes the dynamic. It allows you to create a high-density spine down the middle of your warehouse.

One side can serve the intake area, receiving raw bundles from the loading dock, while the other side faces the production saws, feeding the machines. This flow-through capability reduces the travel distance for materials. Because the arms extend 100% out on either side, you don’t need to “bury” stock. Every bundle, on every level, on both sides, is immediately accessible by overhead crane, eliminating the need to move one item to get to another.

Centralized storage islands maximize vertical space while serving multiple production zones.

The Mechanics of Risk Mitigation

Handling heavy loads from two sides introduces complexity. The priority must be the safe storage of heavy pipes and tubes. If a 5-ton drawer is extended on one side, can the other side also be opened? How do you prevent tipping?

Our systems are engineered with interlock mechanisms specifically for double-sided configurations. These mechanical logic systems prevent simultaneous extension of opposing drawers if it would compromise stability. Furthermore, as shown in the header image, heavy-duty limit switches and physical stops ensure that every movement is contained within safe parameters. This engineering removes the “human error” factor, ensuring that the rack remains stable regardless of how busy the shift gets.

Direct from the Source: Quality Assurance

When implementing a system that holds hundreds of tons of steel, the source matters. Sourcing directly from specialized fabrieken van telescopische opslagrekken ensures that you are getting equipment designed for your specific load cases, not a generic catalog item.

Factory-direct engagement allows for the customization of column spacing and base widths to suit your specific double-sided application. It also ensures that the steel used is certified structural grade (like Q355), capable of handling the eccentric loading forces unique to cantilevered drawers. This direct line to the manufacturer guarantees that the safety factors calculated during the design phase are faithfully executed in the final welded product.

Operators maintain a safe distance while overhead cranes handle the heavy lifting.

Veelgestelde vragen

1. Does a double-sided rack require a larger base?
Yes. The base of a double-sided unit is typically wider to provide the necessary counterweight and stability moment. However, because it serves two aisles, the overall footprint efficiency is significantly higher than two single-sided rows placed back-to-back.

2. Can I have different arm lengths on each side?
Absolutely. This is a common configuration. For example, one side can have 1-meter arms for heavy solid bars, while the other side has 1.5-meter arms for lighter tubing or sheet metal cassettes, optimizing the rack for your specific inventory mix.

3. How do you anchor a double-sided system?
Anchoring is critical. We use high-tensile chemical anchors to bond the base plates to your concrete slab. The number and depth of anchors are calculated based on the maximum potential tip-load, ensuring rigidity even during seismic events.

4. Is it possible to automate one side and keep the other manual?
Yes. The drive mechanisms are independent per drawer. You could install electric drives on the side facing a high-volume automated saw while keeping the other side manual for bulk storage or low-frequency access.

5. What is the maximum height for a double-sided unit?
We can manufacture these units up to 6-8 meters high. The limiting factor is usually your building’s ceiling height and crane hook height. Taller units are an excellent way to maximize the “air rights” in the center of your facility.