{"id":28892,"date":"2025-12-02T09:34:46","date_gmt":"2025-12-02T01:34:46","guid":{"rendered":"https:\/\/sheetstorage.com\/?p=28892"},"modified":"2025-12-02T09:35:00","modified_gmt":"2025-12-02T01:35:00","slug":"2512il-problema-di-20-piedi-come-stoccare-lunghe-barre-di-acciaio-senza-sprecare-il-vostro-magazzino","status":"publish","type":"post","link":"https:\/\/sheetstorage.com\/it\/2512il-problema-di-20-piedi-come-stoccare-lunghe-barre-di-acciaio-senza-sprecare-il-vostro-magazzino\/","title":{"rendered":"Il \u201cproblema dei 20 piedi\u201d : come conservare barre di acciaio lunghe senza sprecare il proprio magazzino"},"content":{"rendered":"

\n\n
\n\n

\n Handling standard pallets is easy. Handling 6-meter (20-foot) bundles of structural steel<\/strong> or stainless steel tubing<\/strong> is a logistical nightmare. They require massive turning radiuses for forklifts, creating a sea of “dead air” in your warehouse aisles.\n <\/p>\n

\n The Telescopic Cantilever Rack<\/strong><\/a> fundamentally changes the geometry of long-goods storage. By utilizing overhead cranes<\/strong> instead of forklifts, you eliminate the need for wide turning aisles entirely. You can stack 20-foot loads up to 6 meters high, accessing them via roll-out drawers<\/strong> that present the material perfectly for a vertical lift. It is the only way to store long materials densely and safely.\n <\/p>\n<\/td>\n<\/tr>\n<\/table>\n

\n Talk With An Expert<\/a>\n<\/div>\n

Stop the “Forklift Wiggle”<\/h2>\n

\n We have all seen it: a forklift operator trying to navigate a 6-meter bundle of pipe<\/strong> down a narrow aisle. They have to wiggle back and forth, drive slowly, and constantly check for clearance. It is slow, dangerous, and prone to damaging inventory.\n<\/p>\n

\n With a crank-out rack system<\/strong>, the material movement is linear. The drawer extends straight out. The crane lifts straight up. There is no turning, no wiggling, and no risk of the load swinging into adjacent racks. This streamlined flow is essential for Steel Service Centers<\/strong> that move high volumes of long products daily.\n<\/p>\n

Support for Flexible Loads<\/h2>\n

\n Long materials like small-diameter aluminum profiles<\/strong> or PVC pipes can sag if not supported correctly. Traditional racks often have wide column spacing that allows flexible materials to bow, causing permanent deformation.\n<\/p>\n

\n Our racks can be configured with multiple columns (e.g., 4 or 5 columns for a 6-meter span) to provide adequate support points. This ensures your high-value inventory remains straight and true, ready for the laser cutter<\/strong> or lathe without needing straightening rework.\n<\/p>\n

\n
\n \"Remote
\n <\/a>\n<\/div>\n

Spec Comparison: Storing 6-Meter Bars<\/h3>\n

\n See why the aisle width calculation changes everything.\n<\/p>\n\n\n\n\n\n
Storage Method<\/th>\nRequired Aisle Width<\/th>\nTotal Floor Space (100 tons)<\/th>\n<\/tr>\n
Forklift & Static Rack<\/strong><\/td>\n6.5 Meters (for turning)<\/td>\n~300 sq meters<\/td>\n<\/tr>\n
Side-Loader Forklift<\/strong><\/td>\n2.5 Meters<\/td>\n~180 sq meters<\/td>\n<\/tr>\n
Telescopic Rack & Crane<\/strong><\/td>\n1.5 Meters<\/strong><\/td>\n~120 sq meters<\/strong><\/td>\n<\/tr>\n<\/table>\n
\n Talk With An Expert<\/a>\n<\/div>\n
\n

Frequently Asked Questions<\/h3>\n
\n

1. Can this system handle 12-meter lengths?<\/h4>\n

Yes. We build custom units for 12-meter (40-foot) stock. These typically feature more support columns (6 to 8) and synchronized dual-gear drives to ensure the extra-long drawer extends evenly without jamming.<\/p>\n<\/div>\n

\n

2. What is the advantage of the remote control?<\/h4>\n

For long, heavy loads, visibility is key. The remote allows the operator to stand at the end of the material to check for clearance, rather than being stuck at a fixed control station. It offers the ultimate flexibility in operator positioning.<\/p>\n<\/div>\n

\n

3. Can we store bundles of different lengths on the same level?<\/h4>\n

Yes, but the longest item dictates the required arm length. If you mix 3m and 6m bundles, we recommend placing the shorter bundles near the columns for better weight distribution, or using our steel decking accessory to create a full shelf surface.<\/p>\n<\/div>\n

\n

4. How do you prevent the long arms from sagging?<\/h4>\n

We use high-grade structural steel rectangular tubing for the arms, engineered with a specific safety factor. Additionally, the columns are tied together with heavy-duty X-bracing to prevent any torsional twisting of the main structure under load.<\/p>\n<\/div>\n

\n

5. Does this system work with a vacuum lifter?<\/h4>\n

It is the perfect partner for a vacuum lifter. Because the drawer extends fully, the lifter has complete top-down access to the material surface. This combination is the industry standard for handling delicate stainless steel without scratching.<\/p>\n<\/div>\n<\/div><\/div>