![\"Compact](\"https:\/\/sheetstorage.com\/wp-content\/uploads\/2026\/01\/versatile-sheet-storage-racks-8.webp\" "\\"\\"")
<\/p>\nA compact technical solution for sheet storage beside a laser cutting workstation, combining manual heavy-duty drawers, opposite-side material access, and a structure that stays compatible with overhead lifting.<\/p>\n
The client required storage for three sizes of unitized sheet material. The storage concept called for manual drawers throughout, with an expected working target of about 1.5 tons per drawer. Material loading had to be completed from the right side by forklift, while the left side needed to remain available for lifting into the next production step.<\/p>\n
The rack width had to remain within 2.8 meters. Each layer required 300 mm of storage space, drawer levels needed steel plate support, and the top level required an upper cover. Because the rack would work beside a laser cutting machine using overhead lifting, the upper structure could not block the lifting route.<\/p>\n
The technical response uses a detachable frame structure suitable for shipment and on-site assembly. This arrangement supports machine-side installation in a compact working area while still keeping the structure serviceable for export projects.<\/p>\n
To support two-direction handling, the drawer system is arranged for dual-side manual crank operation. Track limit bolts are fitted on both sides to manage travel stroke, and triangular reinforced joints are used at frame connections to improve overall stability.<\/p>\n
![\"Dual](\"https:\/\/sheetstorage.com\/wp-content\/uploads\/2026\/01\/versatile-sheet-storage-racks-1.webp\" "\\"\\"")
| Parameter<\/th>\n | Wert<\/th>\n | Notizen.<\/th>\n<\/tr>\n |
|---|---|---|
| Outer column length<\/td>\n | 3228 mm<\/td>\n | <\/td>\n<\/tr>\n |
| Outer column width<\/td>\n | 2600 mm<\/td>\n | <\/td>\n<\/tr>\n |
| Outer column height<\/td>\n | 1580 mm<\/td>\n | <\/td>\n<\/tr>\n |
| Wheel diameter<\/td>\n | 125 mm<\/td>\n | <\/td>\n<\/tr>\n |
| Drawer design load<\/td>\n | 2500 kg<\/td>\n | <\/td>\n<\/tr>\n |
| Safety factor<\/td>\n | 1.5<\/td>\n | <\/td>\n<\/tr>\n |
| Oberfl\u00e4chenbehandlung<\/td>\n | Electrostatic powder coating<\/td>\n | Customizable<\/td>\n<\/tr>\n |
| Surface color<\/td>\n | Red + black<\/td>\n | Customizable<\/td>\n<\/tr>\n |
| Color code<\/td>\n | To be confirmed<\/td>\n | Customizable<\/td>\n<\/tr>\n<\/table>\nKey Engineering Points<\/h2>\n
Packing Reference<\/h2>\nThe standard packing method uses stretch film and packing straps. This avoids extra packaging cost but cannot fully eliminate possible surface paint damage caused by collision during transport. Wooden case packing is available if stronger protection is required.<\/p>\n Reference packing size is 3028 \u00d7 1700 \u00d7 1750 mm, and the packed unit weight is about 3.0 tons.<\/p>\n Operation and Inspection Notes<\/h2>\nForklift entry and lifting should be performed at controlled speed. Rough handling may damage the rack and affect service reliability. Operators should confirm drawer position before loading or unloading sheet material.<\/p>\n Routine checks should focus on drawers, columns, and welded areas for bending, deformation, or weld cracking. Incorrect stacking and incorrect drawer position may create tipping risk during material handling.<\/p>\n Request a Customized Technical Layout<\/h2>\nSubmit your sheet sizes, drawer load target, and width limit to receive a technical layout matched to your production-side material route.<\/p>\n |
![\"Heavy](\"https:\/\/sheetstorage.com\/wp-content\/uploads\/2026\/01\/versatile-sheet-storage-racks-7.webp\" "\\"\\"")
<\/p>\n